 |
|
 Singularity LT, 250mlSingularity LT is a sprayable, low temperature activating formulation of Singularity, suited to application on canvas and many textiles, polymers, and wood. It is activated by heating to ~140C (300F) for 10 minutes, which can be accomplished with an oven, hair dryer or paint stripper. It creates a coating that will absorb 98.5% of visible light incident upon it. We recommend that customers consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include ground hazmat shipping to the continental United States. Contact us for international orders. .Coverage ~250 cm 2 (~6"x 6") We look forward to continuing to progress forward with our Black Optical Paints in the years to come. Any questions, please reach out sales@nano-lab.com On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 SB-LT-500mlSingularity LT-AERO is a sprayable, low temperature activating formulation of Singularity, suited to application on metals, composites, polymers, etc., and suited to the needs of the Aerospace community. It is activated by brief heating to ~140C (212F) for 10 min, which can be accomplished with an oven or heat gun. Parts with this treatment will absorb 99% of visible light, and have low outgassing properties. Contact us for an SDS. Application: Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. We also offer part coating services. Pricing does not include ground hazmat shipping to the continental United States. Note this item ships domestic hazmat ground or air only. Contact us for international orders. Coverage and Shelf Life Singularity Black LT Aero is packaged in steel cans, and have a 6 month shelf life in its unopened state. Store sealed in a humidity-controlled area at room temperature or below. Coverage is 0.65cm2/ml.Coverage ~500 cm 2 (~8"x 9") Certificate of conformance is available for each lot. Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Singularity LT, 1 literSingularity LT is a sprayable, low temperature activating formulation of Singularity, suited to application on canvas and many textiles, polymers, and wood. It is activated by heating to ~100C (212F), which can be accomplished with a hair dryer or heat gun It creates a coating that will absorb 99% of visible light. Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include ground hazmat shipping to the continental United States. Contact us for international orders. .Coverage ~1000 cm 2 (~12"x 12") As of October 15, 2021, all Singularity Black Low Temp products will be a 2x concentrated strength, giving the customer more area coverage than previously offered with the 1x strength Over the past year, Nanolab, Inc has worked to engineer and improve their pioneer product, Singularity Black Low Temperature Optical Paint. We believe offering the 2x strength will benefit our customers while achieving the low reflectance they have come to expect with our coating but using less paint. If you want to work in the older 1x strength after October 15th, you will need to dilute this in a 50:50 ratio with THF solvent. We look forward to continuing to progress forward with our Black Optical Paints in the years to come. Any questions, please reach out sales@nano-lab.com On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Singularity-1LSingularity is a brushable or sprayable formulation that creates a coating that will absorb 98.5% of visible light incident upon it. We recommend that customers consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include ground hazmat shipping to the continental United States. Contact us for international orders. .Coverage ~1000 cm 2 (~12"x 12") On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. |
|
|
 Singularity Black LT Aero, 1 GallonSingularity LT-AERO is a sprayable, low temperature activating formulation of Singularity, suited to application on metals, composites, polymers, etc., and suited to the needs of the Aerospace community. It is activated by brief heating to ~140C (212F) for 10 min, which can be accomplished with an oven or heat gun. Parts with this treatment will absorb 99% of visible light, and have low outgassing properties. Contact us for an SDS. Application: Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. We also offer part coating services. Pricing does not include ground hazmat shipping to the continental United States. Note this item ships domestic hazmat ground or air only. Contact us for international orders. Coverage and Shelf Life Singularity Black LT Aero is packaged in 1 gallon steel cans, and have a 6 month shelf life in its unopened state. Store sealed in a humidity-controlled area at room temperature or below. Coverage is 0.65cm2/ml. A 1 gallon quantity covers a panel 50x50cm, or 2.7ft2. Certificate of conformance is available for each lot. Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Singularity Black Paint, 500mlSingularity is a brushable or sprayable formulation that creates a coating that will absorb 98.5% of visible light incident upon it. We recommend that customers consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include shipping. Item ships Ground to the continental United States. .Coverage ~500 cm 2 (~9"x 9") On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. |
|
|
 Singularity Black Paint, 250ml volumeSingularity is a brushable or sprayable formulation that creates a coating that will absorb 98.5% of visible light incident upon it. We recommend that customers consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include shipping. Item ships Ground to the continental United States.Coverage ~250 cm 2 (~6"x 6") On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. |
|
|
 Singularity Black Paint LT, 20ml starter sizeSingularity Black LT sample
Singularity LT is a sprayable, low temperature activating formulation of Singularity, suited to application on canvas and many textiles, polymers, and wood. It is activated by heating to ~100C (212F), which can be accomplished with a hair dryer or paint stripper. It creates a coating that will absorb 98.75% of visible light incident upon it. We recommend that customers consult with NanoLab personnel before working with the paint to ensure good results and safe practices. Pricing does not include ground hazmat shipping to the continental United States. Contact us for international orders. .Coverage ~20 cm 2 (~1.5"x 1.5") As of October 15, 2021, all Singularity Black Low Temp products will be a 2x concentrated strength, giving the customer more area coverage than previously offered with the 1x strength Over the past year, Nanolab, Inc has worked to engineer and improve their pioneer product, Singularity Black Low Temperature Optical Paint. We believe offering the 2x strength will benefit our customers while achieving the low reflectance they have come to expect with our coating but using less paint. If you want to work in the older 1x strength after October 15th, you will need to dilute this in a 50:50 ratio with THF solvent. On Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Singularity ScratchpadWe coat a 6 inch square white glazed ceramic tile or glass window pane with Singularity, and leave it in its partially cured state. At this stage, the coating can be removed just as you would work any other scratchpad, with pin tools, blades, etc. The partially cured Singularity leaves no residue when stripped, so you can obtain extreme contrast with the white tile, or make unique depth effects with the glass. Shown above, the coating has been removed from the tile, leaving the fracture pattern, and then heated to 300C to activate the coating. Note- to prevent cracking, ensure even heating when activating the coating. Make use of a kiln or dedicate a small broiler oven. |
|
|
 Gravity Black Oil Paint, 37ml Gravity Black is our answer to the oil painters who loved working with Singularity, and wanted an oil paint version. Gravity Black is a linseed oil based, carbon nanotube filled paint that creates an exceptionally matte, deep black color, and blends into other paints without imparting a change in hue. Ships in a standard 37ml tube. Shipping costs are not included in price of paint.
Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Gravity Black Oil Paint, 150mlGravity Black is a premium, highly matte black oil paint, formulated with a traditional linseed base, but with NanoLab's nanotechnology based fillers/pigments. These are finer than any other oil paint on the market, all the same size, and treated to be oil compatible. Gravity is the darkest matte paint available. Shipping costs are not included in price of paint.Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 Singular Velvet Appliqué, 12x12"Singular Velvet Appliqué is one of the darkest materials we make. It is a 12"x12" square velvet, over-coated with Singularity LT, and backed with an aerospace grade adhesive 3M 467MP. Optically, it absorbs >99% of visible light (400-800nm), and absorbs very well in the infrared, >98.7% at 2000nm. As an applique, it can be cut to any shape, and then applied to a surface. It has exceptional grazing angle performance too, so it is perfect for telescope lining, or other projects where a low outgassing, high performance appliqué is required. 
 |
|
|
 Singularity LT coated sampleMany customers want a Singularity LT coated reference sample for analysis, or to use as a benchmark to know that their coating work is achieving the same level of black that we do here in our facilities. Samples are 2x2" squares, 0.032" thick, made from 6061 aluminum, with a Singularity LT coating on one side, in a protecting case. These items are hand sprayed and as such not returnable |
|
|
 SBLT-AERO, 1 quartSingularity LT-AERO is a sprayable, low temperature activating formulation of Singularity, suited to application on metals, composites, polymers, etc., and suited to the needs of the Aerospace community. It is activated by brief heating to ~140C (212F) for 10 min, which can be accomplished with an oven or heat gun. Parts with this treatment will absorb 99% of visible light, and have low outgassing properties. Contact us for an SDS. Application: Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. We also offer part coating services. Pricing does not include ground hazmat shipping to the continental United States. Note this item ships domestic hazmat ground or air only. Contact us for international orders. Coverage and Shelf Life Singularity Black LT Aero is packaged in 1 quart steel cans, and have a 6 month shelf life in its unopened state. Store sealed in a humidity-controlled area at room temperature or below. Coverage is 0.65cm2/ml. A quart covers a panel ~650cm2. Certificate of conformance is available for each lot. Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 SBLT-AERO, 1 PintSingularity LT-AERO is a sprayable, low temperature activating formulation of Singularity, suited to application on metals, composites, polymers, etc., and suited to the needs of the Aerospace community. It is activated by brief heating to ~140C (212F) for 10 min, which can be accomplished with an oven or heat gun. Parts with this treatment will absorb 99% of visible light, and have low outgassing properties. Contact us for an SDS. Application: Customers must consult with NanoLab personnel before working with the paint to ensure good results and safe practices. We also offer part coating services. Pricing does not include ground hazmat shipping to the continental United States. Note this item ships domestic hazmat ground or air only. Contact us for international orders. Coverage and Shelf Life Singularity Black LT Aero is packaged in 1 gallon steel cans, and have a 6 month shelf life in its unopened state. Store sealed in a humidity-controlled area at room temperature or below. Coverage is 0.65cm2/ml. Certificate of conformance is available for each lot. Safety: When Singularity is sprayed through an air brush, the aerosolized particles contain the polymeric binder, the carbon nanotubes and the fugitive solvent. These polymer-bound particles should not pose a health risk, but caution is warranted with any new material. Droplet sizes we have measured are typically larger than 5 microns, but other sprayers may differ in aerosolization. A respirators with a National Institute for Occupational Safety and Health (NIOSH) rating of P95 or greater have been shown to prevent the inhalation of CNTs under normal breathing conditions, and is mandatory safety equipment. The properties of nanotubes are not yet well understood, so use caution. PLEASE NOTE : Due to the special packaging required to ship flammable liquids, we do not accept returns of Singularity Black LT. Please discuss with NanoLab if there is a concern about shipping. Terms & Conditions: We encourage respectful, collaborative relationships between NanoLab and our Customers. Customers agree not to repackage or resell any NanoLab Products. We want to celebrate your achievements. By purchasing NanoLab products, customers agree to credit NanoLab as a supplier, in both technical articles and works of art, wherever appropriate and feasible. Customers agree that NanoLab may also release this information. Should secrecy be important to a particular application, contact us to put a nondisclosure agreement in place. |
|
|
 SingularityLT 20mL with Sample |
|
|
|
|
 Morgan White Acrylic, 150mLMorgan White is a new white, formulated from a lab-synthesized particle with exceptionally flat response across the spectrum. It will not hue your paints, they simply lighten or darken what is present in the color you are blending. Morgan White is a premium, matte acrylic paint, but with NanoLab's nanotechnology based fillers/pigments. This pigment is in a flake form, with nanoscale thickness. This lets it glide smoothly and behave as a clean, untinted background for anything mixed with it. It will be dry-to the-touch in several hours. Morgan White is extremely light fast- as a stable, inorganic nanostructure, it is archival. It will not degrade. |
|
|
|
|
 Morgan WhiteMorgan White is a new white, formulated from a lab-synthesized particle with exceptionally flat response across the spectrum. It will not hue your paints, they simply lighten or darken what is present in the color you are blending. Morgan White is a premium, matte acrylic paint, but with NanoLab's nanotechnology based fillers/pigments. This pigment is in a flake form, with nanoscale thickness. This lets it glide smoothly and behave as a clean, untinted background for anything mixed with it. It will be dry-to the-touch in several hours. Morgan White is extremely light fast- as a stable, inorganic nanostructure, it is archival. It will not degrade. |
|
|
|
|
| Singularity Coating ServicesOptical Black Coatings of Carbon Nanotubes with near zero reflectance in the optical, and IR. |
|
|
 Optical VelvetOptical Velvet is a low cost adhesive backed product suited to applications where absorbance of visible light is desired. The adhesive used is the same 3M 467MP that we use in Singular Velvet. Packaged in lots of 5 sheets, 12x12". Roll widths available on request. |
|
|
 IM 1.6 Index matching black paint
IM 1.6 is index matched to glass, so it creates a void black absorber for situations when light travels through glass and no internal reflection is desired. In contrast to Singularity Black, which is index matched to air, IM1.6 provides an absorbing coating for glass and other optics. Nanolab staff can adjust the paint's refractive index from 1.55 to 1.75 for exact requirements.
IM1.6 can be applied by spray coating, dipping, or brush. The formulation contains carbon nanotubes, a solvent and a binder phase suited for adhesion to glass. Sold in 200ml jars. Due to the flammable solvent, note that this product ships as a hazardous material.Shelf life is 6 months unopened under the recommended storage conditions (room temperature). This is an air-drying product, with a dry to touch time of ~ 20 minutes at room temperature. Humidity does not affect the drying or cure. Contact us for an SDS for this product.  |
|
|
| Cromer Black CoatingCromer Black is a highly laser tolerant coating that is ~96-97% absorbing from the visible to the near IR. NanoLab suggests this coating for beam dumps and other parts seeing high power laser fluence. Cromer Black has an impressive laser damage threshold of 15 kW/cm2 at a wavelength of 1064 nm. Data for this formulation was collected at National Institute of Standards and Technology, Boulder:
NanoLab formulates and applies this silicate-bound, carbon nanotube-based absorber in house to customer parts, using the same CNT used in our other paints and coatings. It is not available for individual sale. Parts suitable for this coating include metals that can withstand a 140C baking temperature, which is used to cure the coating. Coating thickness is typically ~10 micron, and has demonstrated good adhesion to copper, aluminum, glass, and stainless steel. For coating of customer parts, see our Or call us to discuss custom work (781) 609 2722 or email us at sales@nano-lab.com  |
|